Skip to main content

Write a Review

$108.00 $110.00 2% Off
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm
$50.00 - $116.00 $89.99 - $116.00 Up to 50% Off
Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years
$55.00 $99.60 45% Off
Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. Includes end cap for 12 x 142 and 12 x 148mm hubs Fits Shimano 12-speed Micro Spline cassettes Crafted from lightweight aluminum Compatible with 12mm thru-axles
$45.00 - $100.00 $100.00 Up to 55% Off
- TruDri fabrics move sweat away from the body to keep you dry and comfortable - Carvico sleeve and shoulder panels increase abrasion resistance - Slit hem detail offers maximum mobility - Bonded hem, neck and sleeve openings reduce chafing - Body mapped laser cut perforations increase cooling
$50.00 - $99.95 $99.95 Up to 50% Off
Technical performance that works on and off the bike.
$60.00 - $120.00 $120.00 Up to 50% Off
The ultimate in speed and performance.
$60.00 - $89.95 $89.95 Up to 33% Off
Stylish, affordable, MIPS™ trail helmet The Mainframe MIPS™ Helmet gives you exactly what you're looking for in an affordable helmet: proven safety features combined with easy trail steez. Featuring extended coverage to protect more of your noggin', the proven MIPS™ impact protection will keep your brain safe in the event of a crash by absorbing and redirecting energies and forces that could otherwise damage it. With a lightweight fit system, the Mainframe MIPS Helmet will also keep you cool, and should the sweat stank builds up, you can easily whip the moisture-wicking liner out and run it through the wash. Great protection at a price that'll save your wallet undue stress. - Proven MIPS™ impact protection system reduces rotational forces in a crash - Extended coverage for added safety - Optimized venting with channeled, in-molded EPS provides efficient cooling - Removable, washable moisture wicking liner - MIPS™ integrated fit system reduces weight and provides a more comfortable, seamless fit - Weight: 390 g, medium - EPS, PC, PA, polyester
$63.00 - $99.95 $89.95 - $99.95 Up to 30% Off
A Technical Mountain Bike Short That Works On and Off the Bike The Ranger MTB Shorts pack mountain-bike-specific technology into a casually styled short that performs both on and off the bike. The stretch Ripstop fabric ensures maximum performance and superior durability. The waist adjusters are easy to adjust and extremely comfortable. The inner waistband features TruDri technology to move moisture away from your skin and keeps you cooler and drier. Features - Removable liner with dual-density chamois for improved saddle comfort - Stretch ripstop fabric maximizes performance on every ride - Goggle-strap-inspired low-profile waist-adjustment system ensures a perfect fit - TruDri-lined waistband moves sweat and moisture away from the body keeping you comfortable and dry - Secured zip pocket to stash everything you need for a ride - Durable Water Repellent finish sheds moisture, dirt, and debris - Sublimated camo print, Fox Head screen print - Inseam: 12" Construction - Shell: 57% polyamide nylon / 38% polyester / 5% elastane - Lining: 83% polyester / 17% elastane
$79.99 - $139.95 $139.95 Up to 43% Off
Proven MIPS coverage for superior open-face performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS™ liner, goggle-compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face mountain bike helmets. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready mtb helmets in the market today. - Proven MIPS™ impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle-compatible 3-position adjustable visor - 360 fit system allows you to dial in your perfect fit every ride - Weight: 360 g, medium CERTIFICATIONS: - CPSC - EN 1078 - AS/NZS 2063
$85.00 - $149.95 $149.95 Up to 43% Off
The all-new Union Flat Shoes are set to take your mountain bike adventures to new and sendier levels of "yew!" The flat-pedal version of the Union mountain bike shoes sticks confidently to your platform pedals and should you come into a corner with too much pepper, let you easily stick a foot out and steady the ship. Built with robust features including a molded cap design to protect against rock strikes, the Union Flat shoes handles the rigors of trail abuse with ease. With a lightweight and precise fit, the low-profile, custom-tuned EVA midsole ratchets up your pedal grip and feel, giving you more comfort while you shred. Power to the pedal is optimized care of the molded internal stiffening plate, but it's not stiffness at the expense of off-bike comfort. Should you have to hike-a-bike around that downed tree, you're all good. The sole is designed using the Ultratac™ rubber compound, with the engineered tread pattern providing best-in-class grip and durability. Versatile and with understated style, Union Flat MTB Shoes were born to rip, transitioning from sweet single track to your post-ride tailgate brews with ease. - Flat pedal mountain bike shoes - Ultratac™ outsole balances grip and durability - Custom hex shaped lugs engage with flat pedal - Reinforced toe for protection against rock strikes
$100.00 - $209.95 $199.95 - $209.95 Up to 52% Off
OUR MOST AFFORDABLE DH-CERTIFIED MOUNTAIN BIKE HELMET Offered in youth sizing for the first time, Youth Rampage Helmet offers full face coverage to young park, BMX, downhill and enduro riders. It features a lightweight injection-molded ABS shell inspired by our iconic Rampage Pro Carbon Helmet. Injected mesh vent screens maintain superior ventilation while keeping rocks and twigs at bay as you shred the trails. The fully adjustable visor and proven D–ring closure system adds big-mountain function to this essential style. Key features: - Lightweight, injection-molded ABS shell - Mesh vent screens provide ventilation while filtering dirt and debris - Double d-ring closure - Adjustable visor Certifications: - ASTM F1952-15 Recommended Use: - Age: 5-8 (see measurements) - Downhill, dirt jumping, bike park
$105.00 - $209.95 $209.95 Up to 50% Off
Aggressive styling in our most affordable DH certified helmet Our Rampage Helmet features a lightweight injection-molded ABS shell inspired by our iconic Rampage Pro Carbon Helmet. Large vents provide superior airflow for all-day comfort. The fully adjustable visor and quick release buckle add big-mountain function to this full face MTB helmet. - Proven MIPS™ impact protection system reduces rotational forces in a crash - Lightweight, injection molded ABS shell - Inspired by our podium-proven Rampage Pro Carbon - Mesh vent screens provide ventilation while filtering dirt and debris - D Ring closure - Adjustable visor - CERTIFICATIONS - CPSC - EN 1078AS/NZS 2063 - ASTM 1952-15 downhill - ASTM 2032-15 BMX
$105.00 - $209.95 $209.95 Up to 50% Off
Aggressive styling in our most affordable DH certified helmet. - Lightweight injection molded ABS shell - Inspired by our podium proven Rampage Pro Carbon - Injected Mesh vent screens maintain superior ventilation and airflow while providing protection from dirt and debris - Double D-Ring closure - Adjustable Visor - PC, ABS, PA, EPS, Polyester
$65.00 - $130.00 $120.00 - $130.00 Up to 50% Off
The Source MIPS helmet combines advanced performance and protection in a rugged, trail-ready design. Featuring deep coverage with aggressive ventilation from 16 vents coupled with deep internal channeling, it helps keep things cool even when the riding gets rowdy. And with the comfort and secure feel of the Roc Loc 5 fit system with Integrated MIPS brain protection, plus a moto-style adjustable screw-in visor and full lower Hardbody durability, you get a helmet that's capably equipped for fun and adventure. MIPS: - Integrated MIPS (Multi-Directional Impact Protection System)—allows you to customize fit/feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact Construction: - In-Mold polycarbonate shell and EPS liner - Polycarbonate Hardbody lower shell Visor: - Adjustable moto-style screw-in visor Interior/liner type: - Coolfit anti-microbial padding Ventilation type: - 16 Wind Tunnel Vents with internal channeling Fit system: - Roc Loc 5 Impact liner type: - EPS foam liner Product weight: - 340g (size Medium)
$65.00 - $130.00 $130.00 Up to 50% Off
The Women's Ventana Fastlace was born and bred to navigate the demands of all-mountain adventures and all-day trail riding, when comfort and confidence are essential on the pedals and when you're hiking the trail. With a supportive fit, a sticky rubber outsole, and a Fastlace design, you can head out wherever the trail takes you in the women's Ventana mountain bike shoe. This shoe is built around a stout nylon shank proven on the DH World Cup circuit that powers the pedals like an XC shoe, combined with an injected EVA cushioning midsole and our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is supple and supportive with fast, easy adjustment via the Fastlace design, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - High-friction Fastlace closure with cord lock and soft lace guides - Hook-and-loop closure - Molded EVA footbed with medium arch support - Sensor rubber compound engineered for durability and grip - 360 grams (size 39)
$80.00 - $150.00 $150.00 Up to 47% Off
For the Latch mountain bike shoe, we started with a new fit that brings the foot closer to the pedal and flattens the sole profile, optimizing the contact patch between sole and pedal. Then we collaborated with a team of rubber engineers to formulate Tack Rubber, a highly elastic compound that matches grip with durability in our new Gamma tread design. And at the heart of the shoe is a revelation in performance called Mute Foam, a midsole foam that's specially engineered with a slow-rebound action that cuts chatter and vibration to help keep you connected to the pedal, regardless of ruts, roots, and rocks. The unique combination of fit, a fast-drying microfiber upper, the grip of Tack Rubber, and the damping of Mute Foam makes Latch a new benchmark in flat-pedal performance.
$90.00 - $180.00 $180.00 Up to 50% Off
With pedal power, a sticky rubber outsole, and an easy Boa and forefoot strap closure system, you can head out wherever the trail takes you in the Ventana Mountain Bike Shoe. This shoe is built around a stout nylon shank proven on the DH World Cup circuit to power the pedals efficiently and combined with an injected EVA cushioning midsole plus our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is secure and supportive thanks to a Boa micro-adjustable buckle and forefoot strap closure, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - Rubber reinforced heel and toe sections - Boa l6 dial featuring 1 mm adjustment and macro release, with steel lace and soft lace guides - Velcro forefoot strap - Injected EVA cushioning midsole - Sensor rubber compound engineered for durability and grip - Stainless steel hardware - Molded EVA footbed with medium arch support - 417 grams (size 42.5)
$90.00 - $180.00 $180.00 Up to 50% Off
With pedal power, a sticky rubber outsole, and an easy Boa and forefoot strap closure system, you can head out wherever the trail takes you in the Women's Ventana Mountain Bike Shoe. This shoe is built around a stout nylon shank, proven on the DH World Cup circuit to power the pedals efficiently, and is combined with an injected EVA cushioning midsole plus our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is secure and supportive thanks to a Boa micro-adjustable buckle and forefoot strap closure, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - Rubber reinforced heel and toe sections - Boa L6 dial featuring 1mm adjustment and macro release, with steel lace and soft lace guides - Velcro forefoot strap - Injected EVA cushioning midsole - Sensor rubber compound engineered for durability and grip - Stainless steel hardware - Molded EVA footbed with medium arch support - 408 grams (size 39)
$71.90 - $84.99 $84.99 Up to 15% Off
The Jet XCR is Michelin's fastest rolling off road tire, with a tread pattern that excels in dry & hardpacked XC trail conditions. - Low profile center tread rolls fast while progressive shoulder lugs provide additional cornering traction - Gum-X2D dual compound rubber optimizes rolling efficiency and maximizes grip - Race Shield triple layer 150tpi casing is extremely lightweight and resilient against tears and cuts - Intended Use: Mountain - ISO Diameter: 622 / road / 29" - ISO Width (mm): 53 mm (2.10) / 57mm (2.25) - Tire Bead: Folding - Tire Type: Tubeless Ready Clincher - Weight: 610 (2.10) / 560 (2.25) - TPI: 150
$33.00 - $112.00 $33.00 - $112.00 Up to 16% Off
The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet
$35.00 - $82.00 $35.00 - $82.00 Up to 20% Off
The Maxxis Ardent is a light duty trail tire that rolls fast in dry conditions. For similar rolling speed with improved braking and cornering performance, check out the Rekon.
$82.00 - $101.00 $82.00 - $101.00 Up to 9% Off
The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.
$95.00 - $112.00 $95.00 - $112.00 Up to 1% Off
Aggressive plus tire inspired by the Ikon+ - 27.5+ tire - Designed for aggressive XC trails The Rekon+ is an aggressive trail tire inspired by the Ikon+ for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon+.
$79.50 - $159.00 $159.00 Up to 50% Off
Stretchy, breathable and burly, the Dirt Craft Bike Shorts are a single-track workhorse. Our longest women’s mountain bike shorts, equipped with a removable padded liner and an adjustable waistband, are built for navigating tough climbs and crushing descents. Fair Trade Certified™ sewn.
$62.00 - $65.00 $62.00 - $75.00 Up to 17% Off
This thru axle allows you to specifically attach a FollowMe Tandem Coupling to your thru axle-equipped bike. The FollowMe Tandem Coupling allows to attach your kid’s bike to your bike when they become tired or no longer want to ride on their own. It’s great for when the going gets tough, or just for fun. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel and allow for mounting of the FollowMe Tandem. - No special tools are required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Please note: This axle does not come with the FollowMe Tandem Coupling hardware. You will need to use the hardware that came with your FollowMe. - Designed, built, and quality tested in the USA. Proven around the world.
$41.00 - $54.00 $41.00 - $54.00 Up to 7% Off
Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation
$55.00 - $99.99 $93.00 - $99.99 Up to 41% Off
SRAM's 1070 10-Speed Cassette is a great choice. It's constructed of light and durable materials and boasts SRAM's PowerGlide tooth profiles and shift ramps for quick and positive gear changes every time. This trick cassette also sports a semi-spider construction for a maximum stiffness-to-weight ratio, a lightweight aluminum lockring, and is available in myriad configurations to suit all your riding. There are even models with 36-tooth largest cogs for super-easy climbing.
$60.00 - $124.99 $99.00 - $124.99 Up to 44% Off
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.
$69.99 - $99.00 $99.00 - $107.00 Up to 35% Off
SRAM's X-Sync Boost Direct Mount Chainring features tall teeth with alternating tooth profiles that hold the chain amazingly well and still provide space for mud to clear. - Chainring BCD: SRAM BB30 Direct Mount, SRAM GXP Direct Mount - Color: Black - Drivetrain Speeds: 10, 11 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Offset: 3mm
$55.00 $55.00 - $58.00 Up to 5% Off
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)
Page 1 of 8 Next page