Other

RockShox AXS Remote for AXS dropper seatpost.

Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits. - DT Swiss Star Ratchet Kit - 54T

- Includes barb and olive - Brake Lever Clamp: 22.2mm, MMX compatible - Lever Blade Material: Carbon - Reach Adjust: Tool-free

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide RS

Salsa Pivot Service Kits

Salsa Split Pivot Suspension Service Kits, for all 2014+ Horsethief, Pony Rustler, Spearfish, Redpoint and Deadwood Sus frames.

Original equipment ceramic bearing pulleys and inner cage for SRAM XX1 Eagle rear derailleurs.

36 Air Shaft Assembly for Fox suspension forks.

- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

Original equipment rear derailleur pulleys and inner cage for SRAM X01 Eagle rear derailleurs.

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.

Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1

Fit Kit SET812 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 159—165mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally

RockShox Reverb Stealth Full Service Kit for A2 generation Reverb Stealth dropper seatposts - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - For "A2" designated posts, 2013-2016 Includes new Internal Floating Piston (IFP) - Requires RockShox Reverb Rebuild Tools: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Updated service kit as of 06/2016

36 Air Shaft Assembly for Fox suspension forks.

RaceFace Aeffect R Dropper Cartridge Kits.

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Chgr2.1 damper sealhead, DB air spring sealhead) - Lyrik C2/Pike B3 Sel+ and Ult (2020)

RockShox's Maxle Lite is a lightweight aluminum through-axle system. It lets you remove and install your wheel as fast as with a standard quick-release while delivering the awesome stiffness with the improved strength and control of a through-axle. Plus, the lever can be closed in whatever position you like and no tools are required for installation and use!

- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead

Pike Solo Air Full Service Kit

An essential part of any passenger-carrying system is something they can hold for balance. The Globe Passenger Handlebar bolts to the top of the Haul rear racks to provide passengers of all ages with a comfortable and safe grip. The reversible and versatile design can be mounted anywhere along the rack for a fully customizable setup. **For Globe Haul ST: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Designed for frictionless compatibility with the Globe Haul ST and Haul LT. - All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.

Gnarwolf Chainguide