Filter By:

  • Show More Prices
  • Show Fewer Prices
  • Show More Sizes
  • Show Fewer Sizes

Specialized Equipment

Specialized Men's Stumpjumper Comp Carbon 27.5 - 12-Speed
$4,519.99
Don't worry, S-Works doesn't get to have all of the fun—the new Stumpjumper Comp Carbon 27.5 features the same frame with a full 11m carbon chassis and rear-end as its older brother, but with a solid list of no-fuss components, including a SRAM NX Eagle 12-speed groupset, for an everyman's budget. Our design goal for the new Stumpjumper was simple—build the ultimate trail bike, one that feels telepathic. And it turns out that this feeling all comes down to stiffness. Think of it this way: when the frame's telling your hands one thing and your feet another, your brain gets confused with the imbalance and the bike feels unstable. In order to fix this, we had to get to work on dialing-in the materials, shapes, and the layout. We started by creating our own mountain-specific stiffness test, and then we looked at the layout with Finite Element Analysis (FEA) to see where we could get the biggest stiffness improvements. This led to a big discovery: The Large and X-Large frames needed more front-end stiffness while the Smalls and Mediums were just fine. We were able to create a frame design that was 20% more efficient. And in the end, this proved to be one of the lightest trail frames on the market today. When designing the frame with the stiffness targets being a main goal, we developed a radical new sidearm design. The front-end and rear-end are connected at three points, and the sidearm helps keep all these points super stiff and connected, all while taking about 100 grams out of the rear-end. More explicitly, this minimizes frame flex when the rear suspension is active. We continued down the suspension path with a custom Rx Trail Tune on both the fork and rear shock. Suspension performance is highly dependent on frame, wheel, and rider size, so we use our Rx Tune to get each bike to land in the middle of the adjustment spectrum, and this gives you the biggest possible range to fine-tune your ride. Another focal point of the tune was matching the suspension characteristics between wheel sizes—we developed a specific Rx Tune for each platform. So, no matter what wheel size you prefer, you'll get perfectly linear suspension. Steps were also taken to make this bike easy to live with. Threaded bottom brackets make a triumphant return, and we made room for up to a 3.0" tire. You're also free to run whatever aftermarket rear shock you want since we're using standard metric shocks. We revamped the SWAT box, too, making it sleeker, lighter, and with more volume. And customization is furthered with a Flip Chip that lets you to dial-in your Stumpy to your riding style. Switch it from High to Low and it drops your bottom bracket 6mm and slackens the head tube by half-a-degree. Little details also jump out to surprise you, like a newly designed ribbed chainstay protector that makes chain slap a thing of the past and nearly silences the drivetrain. Lastly, we seriously couldn't make cable routing any easier on carbon models. Full tubes can be found throughout the carbon frame, so all you have to do is push the cable and it'll come out the other end. No more lazy loop, hidden stashes of magnets, pokey spokes, or pillows to cry in. The build on this Comp model comes with a list of components that deliver undeniable quality, like a 12-speed SRAM NX Eagle drivetrain, SRAM Guide R disc brakes, FOX front and rear suspension, and Roval Traverse 27.5 wheels. - The Stumpjumper's asymmetrical, FACT 11m carbon fiber construction is lightweight, stiff, and ready to take on the trail. It's built off our 27.5 Trail Geometry, so it's just the right amount of both capable and comfortable. And with SWAT integration in the down tube, a threaded BB, easy cable routing, and an all-new chain silencer, it's ready for anything the trail, or you, throw at it. - The FOX DPS Performance rear shock features our Rx Trail Tune, ensuring that no matter the wheel or frame size, your bike is dialed-in perfectly. - SRAM's 12-speed NX Eagle groupset features a wide gear range that delivers climbing and descending efficiency in spades.
Specialized Men's Stumpjumper Comp Alloy 29 – 12-Speed
$3,319.99 - $3,320.00
No need to fret—we haven’t forgotten about all you alloy fans out there. In fact, the new Stumpjumper Comp Alloy 29 with 12-speed SRAM NX Eagle may be the most radically designed alloy bike ever made. For real, though. And with new tube shapes and an asymmetrical design, it's going to exceed all of your expectations of how a trail bike should ride. Our design goal for the new Stumpjumper was simple—build the ultimate trail bike, one that feels telepathic. And it turns out that this feeling all comes down to stiffness. Think of it this way: when the frame's telling your hands one thing and your feet another, your brain gets confused with the imbalance and the bike feels unstable. In order to fix this, we had to get to work on dialing-in the material and shapes. We continued down the suspension path with a custom Rx Trail Tune on both the fork and rear shock. Suspension performance is highly dependent on frame, wheel, and rider size, so we use our Rx Tune to get each bike to land in the middle of the adjustment spectrum, and this gives you the biggest possible range to fine-tune your ride. Another focal point of the tune was matching the suspension characteristics between wheel sizes—we developed a specific Rx Tune for each platform. So, no matter what wheel size you prefer, you’ll get perfectly linear suspension. Steps were also taken to make this bike easy to live with. Threaded bottom brackets make a triumphant return, and we made room for up to a 3.0'' tire. You're also free to run whatever aftermarket rear shock you want because we're using standard metric shocks. And customization is furthered with a Flip Chip that lets you to dial-in your Stumpy to your riding style. Switch it from High to Low and it drops your bottom bracket 6mm and slackens the head tube by half-a-degree. Little details also jump out to surprise you, like a newly designed ribbed chainstay protector that makes chain slap a thing of the past and nearly silences the drivetrain. The build on this Comp model comes with a list of components that deliver undeniable quality, like a 12-speed SRAM NX Eagle drivetrain, SRAM Guide R disc brakes, FOX front and rear suspension, and Roval Traverse 29 wheels. - The completely redesigned alloy Stumpjumper frame features an M5 alloy front- and rear-end, an asymmetrical design, and our 29 Trail Geometry, so it's just the right amount of both capable and comfortable. - The FOX DPS Performance rear shock features our Rx Trail Tune, ensuring that no matter the wheel or frame size, your bike is dialed-in perfectly. - SRAM's 12-speed NX Eagle groupset features a wide gear range that delivers climbing and descending efficiency in spades.
Specialized Roval 321 Disc - Rim Brake Rear
$2,500.00
Making up about 50% of your total race time, the bike portion of a triathlon is where equipment choices can make the difference between first and fifth. And no other equipment choice will save you more time than a disc wheel. While traditionally-shaped disc wheels are faster than their spoked counterparts, the 321 disc turns conventional design on its head, creating the fastest wheel available. Disc wheels often fall into two categories—a completely flat shape, with structure coming from carbon fiber and a honeycomb-foam filling, or a spoked wheel that's been faired with a carbon fiber cover. In our quest to break traditions, the 321 uses a single layer of 1k carbon fiber on each side of the wheel, and it all comes together at the brake track bridge. This kind of carbon fiber is rarely used in bicycle components due to its high manufacturing cost, but it offers a bevy of performance benefits. This coveted carbon is much lighter than other layups, like 3k and 12k, and it can only be laid by the most skilled of carbon fiber craftsmen. It's complicated, but the payout is worth it, as it delivers a supple ride and one of the lightest disc wheels available. And in the real world, this means that it'll spin-up quickly and reduce fatigue over the long haul. Stiffness is often the “hot-topic” in the disc wheel world, but we think it’s an interesting conversation. It's long been thought that efficient power transfer and high stiffness are directly correlated, but through extensive field testing, we've determined that this isn't the case at all. In fact, our initial disc was so stiff that, under power, it wouldn't flex with the frame and this caused brake rub. This wrongly creates the perception of a flexy wheel, when really, the wheel is actually too stiff. In order to solve the brake rub problem, we first designed our optimal aero shape and then worked on our internal stiffness targets to fit within what we consider to be a desirable frame stiffness. And while light overall weight was a development priority, our focus was aerodynamics. Through hours of Computational Fluid Dynamics (CFD) and testing in the Win Tunnel, we developed a new-to-category shape that's optimized to work with a tire for on-bike airflow. What this translates to is an all-carbon disc wheel that, on the non-drive-side, has a shape that's as aerodynamic as our current understanding allows, and a drive-side shape that's as aerodynamic as the wheel-dish and derailleur clearance will allow for. To save every possible watt, we've also added CeramicSpeed bearings and DT Swiss 240 hub internals into our hub. Each 321 Disc wheel is also 2Bliss-Ready out of the box and comes with a padded wheel bag, quick-release, tubeless valve, and SwissStop Black Prince brake pads. Designed for the most uncompromising athletes in the world, with engineering to match, the 321 Disc is the world's most advanced disc wheel for your race against the clock. - Rim Type: Carbon clincher, 2Bliss Ready - Rim Material: Carbon - Braking Surface: Carbon Fiber - Brake Track Height: 12mm - Rim Depth: Solid Disc - Rim Width: 19mm internal, 27.3mm external (at brake track) - Rear Hub: Roval Disc, CeramicSpeed bearings, DT Swiss 240 internals, 11-speed - Assembly Method: Handmade - Extras: Roval padded wheel bag, Roval steel quick-release, Roval tubeless valve, SwissStop Black Prince brake pads, Roval valve pocket covers - Weight: 1000g
Specialized Roval CLX 64 Track – Tubular Wheelset
$2,400.00
The CLX 64 Track Tubular was brought to life under the Allez Allez team at the 2016 Red Hook Crit. Along these lines, you get all of the unrivaled aero performance of the CLX 64, albeit with DT Swiss track hubs and Aerolite spokes, for a stiff, smooth, and most importantly, fast ride on the boards. One of the first questions we get about the CLX 64 is, “Why 64mm instead of 65mm?” To put it simply, it's because 64mm tested faster than 65mm. One millimeter—that's how deep our testing goes. Having an in-house wind tunnel allows us to run every possible variation, and after two-years of development, 80 variations in rim design, and nearly 300 hours of Win Tunnel testing time studying tire and frame interactions, we found 64mm to be the fastest iteration for normal riding conditions. In fact, it's even faster than the 80-plus-millimeter-deep wheels they were tested against. Being able to use a shape that’s nearly 20mm shallower than the competition, yet just as low in drag, makes for a wheel that has drastically less side force and steering torque. This translates to less buffeting and more confidence in even the gustiest winds. Another positive of a shallower rim depth is the reduction in weight that follows using less material. Many deep carbon wheels feel “slow” due to their high inertia value. What's that? Inertia is the amount of force it takes to accelerate or decelerate, and wheels that are built around heavier rims lack the liveliness that many riders crave. Being over a half-a-pound lighter than the other wheels in its aero category, the CLX 64 accelerates, decelerates, and changes direction with less effort.
Specialized Roval Traverse 38 SL Fattie 27.5 148
$1,900.00
While there may be a linear relationship between increased tire size and increased fun, this relationship only holds true when wider tires are paired with the correct width rims. Having a 2.8", or high-volume, tire mated to a narrow rim makes for a squirmy, poor handling experience, and when you’re on the hunt for additional fun, these characteristics are undesirable. Lucky for you, the new age of traction, stability, and speed has arrived—and its name is the Traverse 38 SL Fattie 27.5. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. While our 38-millimeter Traverse SL is already wider than most offerings, the benefits of three-inch tires become more apparent with a proper rim interface. In search for the proper width, our engineers tested various iterations, from 30 to 45 millimeters, to determine where the sweet spot lies. What they ended up with is a 38-millimeter internal rim width that turns the Traverse 38 SL Fatties into descending machines. A wide internal rim width endows riders with a variety of advantages that are exemplified even more with plus-sized tires. The extra width allows for more tire volume, translating into more supple ride qualities, and better support for the tire, meaning that you'll experience less "burping" when riding tubeless and a drastic increase in traction. After determining the proper rim width for the plus-sized application, we began designing the rim using the same low-weight, high-strength technologies used in the Traverse SL and the Control SL. With this, we started with our Zero Bead Hook design that effectively eliminates the biggest weak spot found in traditional rims, and topped it off by using high-modulus carbon fiber to keep the weight down. And to further this theme, the wheels also include the Roval tubeless plug system, which sheds an additional 50 grams-per-wheel compared to a rim strip Each Traverse 38 SL Fattie is hand-built to our own alloy hubs with DT Swiss Competition Race spokes. Inside our hubs, you'll find sealed cartridge bearings all-around, and a quick-engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a decent job of building wheels, we choose professionally trained humans to build ours, as they catch various flaws that a machine would otherwise miss.
Specialized Roval Traverse SL Fattie 27.5 148
$1,900.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 27.5 puts all the flick'able, nimble features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Specialized Roval Traverse SL Fattie 29 148
$1,900.00
Trail wheels often fall into two categories—they’re either heavy and durable or light and flexy. And because of this, a lightweight, wide-profile, and enduro-ready carbon wheel seems like something only found in a fairytale, but lucky for you, we made it a reality. The Traverse SL Fattie 29 puts all the features you need in an all-mountain wheel into one package, and it has the results to prove it. Along with light overall weight, stiffness, and durability, another top priority for the Traverse SL was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for both the front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. What's with the big-boned name, you ask? The Traverse SL Fatties may be wide, but with a 30mm inner rim width, they’re far from the girth of a fat bike rim. But let's talk width. You've probably noticed that mountain bike rim widths have hovered between 19 and 23 millimeters for decades, and they've been long overdue for a change. In the search for a better wheel design, our engineers began testing 2.3- to 2.5-inch tires on 45-millimeter-wide fat bike rims to see what, if any, benefits could be found. It only took them a few rides to realize that the wider rims offered a variety of advantages, like adding additional tire volume, which better supports the tires in hard cornering, greatly improves traction because of the ability to run lower pressures, and noticeably increases rim stiffness. They did note that there is an occurrence of diminishing returns with increasing width, however, and after testing everything from 25 to 45mm, determined that a 30mm inner width is optimal. After determining the width, we began designing the rim using the knowledge that we gained when developing the Control SL. With this, we started with our Zero Bead Hook technology that gets rid of the weak spot found in a traditional wheel, and combined it with the wider profile to make a carbon rim that effectively dissipates forces. This way, you can take abuse from rocks without the worry of cracks or dents. Ok, so they’re strong, impact-resistant, and tire supporting—they must be heavy, right? Wrong. Even though “fattie” is in their name, they're far from fat. To achieve this weight, we hand-build our rims to our own alloy hubs, using only the highest quality DT Swiss Competition Race spokes. Inside our hubs, you'll find DT Swiss 240 internals with a quick engaging 54t DT Swiss star ratchet system in the rear that allows you to power over rocks and roots without delay. And while machines do a pretty good job of building wheels, we choose professionally trained humans because they do so with an artistic touch that makes for minimal flaws. Whether you need a carbon wheelset to get you through an enduro stage or one to shred your local rock garden, the Traverse SL Fattie has you covered.
Specialized Roval Traverse Carbon 148 27.5-inch Wheelset
$1,200.00
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for tough, nimble wheels like our Traverse 27.5 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering, while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously nimble and playful 27.5 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear - Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for front hub - Bearing Type: Sealed cartridge -Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1700g
Specialized Roval Traverse Carbon 148 29-inch Wheelset
$1,200.00
The trails in our neck of the woods get pretty hairy, pretty fast, so we've found them to be the perfect testing ground for fast and tough wheels like our Traverse 29 Carbon. The steep climbs and descents helped inspire some pretty radical designs, and most importantly, left us with no doubt that these wheels will exceed your expectations. Let's talk about those expectations. They include everything from the ability to stay true after launching off drops to being light enough to efficiently pedal to the top of a climb—and they all begin with the rim. Our engineers knew they wanted carbon fiber, and with the inclusion of our Zero Bead Hook design, they were able to implement a continuous fiber layup across the sidewall and rim bed. And when paired with a whopping 30-millimeter internal rim width, you get a wheel that's super resilient to impact with low rolling resistance and incredible traction. You'll also find that it helps prevent "burping" during hard cornering while making tubeless set up quick and easy. A wider rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, and it affords you the ability to run lower pressures to aid in the aforementioned, as well as spreading impact out over a larger surface area to reduce the risk of damage during impact. And when you combine this girth with the notoriously fast rolling 29 platform, you’re left with an incredibly stiff, quick to accelerate wheelset that climbs just as well as it shreds descents. After designing the perfect trail rim, we kept our lightweight and durable design properties in mind with the wheel build, hand-lacing the rims DT Swiss 350 Classic hubs via 28 (front) and 28 (rear) DT Swiss Competition Race spokes and brass Pro Lock nipples. Inside, you'll find sealed cartridge bearings and a 36t quick engagement ratchet system for quick accelerations. We also wanted to ensure that each wheel was built correctly, and we found that this could only be achieved by hand. Machines, we found, have a tendency to miss little mistakes that humans would otherwise catch. Finally, with the 15x110 / 12x148mm variant, you receive all of the benefits that Boost spacing offers. By increasing the width of the front and rear hub flanges, and in turn, increasing frame and fork clearance and stiffness, you obtain a stiffer, stronger, and more durable system at a minor weight penalty. Each wheelset comes packaged with a SRAM XD driver, 11-speed freehub, and a tubeless valve stem in order to make tubeless set-up a touch easier. *Please note that Shimano freehubs are sold separately. - Rim Type: Carbon clincher, 2Bliss Ready, Zero Bead Hook design. Black graphic under clear coat. - Rim Material: Carbon fiber - Rim Width: 30mm internal - Front Spoke Pattern: Two-cross - Rear Spoke Pattern: Two-cross - Spoke Count: 28h Front, 28h Rear -Spoke Type: DT Swiss Competition Race - Nipple Type: DT Swiss Brass Pro Lock hexagonal - Front Hub: DT Swiss 350 Classic, 28h, 15x110mm thru-axle, 6-bolt, includes 15x110mm 19mm OD endcaps - Rear Hub: DT Swiss 350 Classic, 28h, 36t quick engagement ratchet system cassette, includes SRAM XX1 XD freehub - Includes 31mm OD end caps for the front hub - Bearing Type: Sealed cartridge - Every wheel includes a tubeless valve stem in order to make tubeless set-up a touch easier. - Assembly Method: Hand-built - Total Wheelset Weight: 1800g
Specialized Roval Traverse Fattie 27.5 148
$650.00
In the early design phases of our Traverse Fattie 27.5, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a super nimble, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.
Specialized Roval Traverse Fattie 29 148
$650.00
In the early design phases of our Traverse Fattie 29, we recognized that the number of aluminum wheels that had the prowess to both shred rowdy descents and to provide the efficiency required of our Northern California testing grounds' relentless climbs were far and few between. We also came to realize that trail riders expect certain features in a proper, send-it-ready wheelset. And for the price, we found that alloy hit many of these expectations, while also keeping enough jingle-jangle in your wallet for a post-ride beverage. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. We took the traditional 19- to 23-millimeter standard and moved it out to what we found worked best in testing—a whopping 30mm “Fattie” width. A wide rim does a variety of things for ride performance—it better supports the tire for increased confidence and grip, it affords you the ability to run lower pressures, and it spreads impact out over a larger surface area to reduce the risk of damage. We also added our Zero Bead hook design to the mix, and this ultimately aids in preventing “burps” during hard cornering, while also making tubeless set up quick and easy. After developing what we found to be the perfect alloy trail wheels, we went farther down the perfection path, hand-lacing the rims to our own alloy hubs that allow for the same spoke length throughout the entire wheelset, via 28 DT Swiss Revolution J-Bend spokes and Pro Lock nipples. Inside our hubs, you'll find sealed cartridge bearings and DT Swiss 360 rear internals that'll keep you rolling smoothly for miles. We also wanted to ensure that each wheel was built correctly, so we built them by hand. Each wheelset comes packaged with a SRAM XD-driver and a tubeless valve stem in order to make tubeless set-up a touch easier. Please note that Shimano freehubs are sold separately.
Specialized Roval Traverse Fattie 38 27.5 148
$650.00
At the helm of taking traction, stability, speed, and stiffness to new heights stands the Roval Traverse Fattie 38 27.5 wheels. And while, yes, they feature a lightweight alloy rim and a quality build, what turns them into descending machines is the 38mm internal rim width. Let's find out why. The reason behind this is easy: Aside from the lightweight and ultra-rugged E5 alloy construction, the combination of the rim width with wider hub flanges creates an increase in plus-sized tire volume. This means that you get more suppleness in the ride quality. But not only this, the ample width also better supports the tire, so you'll experience less "burping" when riding tubeless, as well as a drastic increase in traction. Along with light overall weight, stiffness, and durability, another top priority for the Traverse was ease of use. First off, we got rid of the creaky straight-pull spokes and corrosion-prone alloy nipples. Next up, we landed on 28 J-bend spokes, for front and rear wheels, that are all the same length—making it easy to find replacements if needed. And finally, we engineered a new hub design, with a wider profile and higher flange to aid in overall stiffness. These aren't just a one-trick pony, though. At the front hub, you'll get a 15x110mm thru-axle (end cap options included), and at the rear, the 148mm hub features DT Swiss internals for lightning-fast engagement and acceleration. And to top everything off, these wheels are hand-built to ensure the perfect tension and a long lifespan. Whether you've just picked up a new 27.5+ bike, or you're curious to try out high-volume tires, like a 2.8", on your Boost™-spaced 29er, the Traverse 38 Fattie 27.5 wheels will leave you impressed after the first spin.
Specialized Stout XC 90 Wheels
$600.00
Utilizing a 90mm wide alloy rim, sealed cartridge bearings, and butted spokes, the Stout XC 90 wheelset confidently balances lightweight with durability and quality to perform in the elements. - Single-wall alloy rims are 90mm-wide and have been mated with aggressive weight cut-outs and a hookless bead design to create a lightweight, fast-rolling wheel. - Front hub body features an alloy construction for added durability, two sealed cartridge bearings for all-weather performance, and oversized 24mm end caps. - Alloy rear hub body includes four sealed cartridge bearings for reliable, all-weather performance, as well as a lightweight alloy cassette body to keep the overall weight down. - Rear hub is convertible to be compatible with standard alloy cassette freehub body for use with 10-speed drivetrains - Lightweight butted spokes are strong and hold their tension through rough riding. - Lightweight alloy nipples hold spoke tension securely and resist rust for added durability.
Specialized Power Cranks - Shimano Ultegra Upgrade Kit
$525.00
Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks Ultegra Upgrade Kit are no exception. With our lightweight power sensors on a Shimano Ultegra crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth® devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 8000 generation Ultegra left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.
Specialized 3L Tech Jacket
$500.00
There are jackets, and then there are jackets that you can use in the backcountry. Not surprisingly, cycling jackets haven't historically focused on the latter. That is, until now. Specialized collaborated with the snow icons at 686 to create a jacket that can laugh in the face of almost any condition, while still retaining all of the fit and functionality required of cycling. The result? The 686 x Specialized 3L Tech Jacket. Starting with the materials, it features a three-layer woven fabric shell with the venerable infiDRY 20. Now, this might sound thick and cumbersome, but really, it's no different than what's found on some of your favorite outerwear. Almost paper thin, the exterior layer handles wind and water resistance (20,000mm), while the intermediary layer consists of a breathable membrane (20,000gm2) that keeps vapor moving up and out of the bibs to eliminate any clammy sensations. Lastly, the interior layer is designed to be soft against the skin to increase the comfort of the piece as a whole. The end result? You're guaranteed to ride dry and with a consistent level of warmth and protection. Never satisfied, Specialized worked to improve ventilation even more, so you'll find Air-Flo upper arm vents that are designed for singlehanded use. They moved on to keeping snow and moisture out of the jacket, which meant incorporating fully taped waterproof seams and water-resistant zippers. There's also an adjustable powder skirt to keep snow from entering at the backside, adjustable Lycra sleeve gussets to interface with gloves, an adjustable hem with a fold-out spray skirt for wet, muddy conditions, and a hood with a rain visor. You'll also find an internal audio pocket, while the back features a double-sided SWAT access pocket for the ultimate in protective storage. And knowing that you'll be taking this jacket deep into the wild, they even built-in a critical safety feature, RECCO Advanced Avalanche Rescue Technology. - Three-layer woven shell fabric with infiDRY 20 (20,000mm water-resistance / 20,000gm2 breathability) is light and airy, keeping you protected from the elements without sacrificing comfort or breathability. - Fully taped waterproof seams and water-resistant exposed zippers protect common points of water infiltration, keeping you dry and protected as you ride. - Air-Flo upper arm vents are designed for singlehanded use, giving you the ability to dump heat on-the-fly with ease. - Mesh vented pocket provides ample storage for your ride essentials or nutrition. - Internal audio pocket safely secures your electronics away from the elements, making it simple and safe to listen to your tunes while you're out on the trail. - Adjustable powder skirt with Lycra stretch panel prevents any snow from creeping up or down your back, whether it's from wheel-spray, hiking through powder, or the inevitable bail. - Adjustable Lycra sleeve gussets interface perfectly with gloves, so you won't experience any unwanted drafts at the sleeve openings. - Equipped with RECCO Advanced Avalanche Rescue Technology, 3M reflective cuff tabs and trims increase your visibility to other riders or motorists in low-light conditions. - Adjustable hood with rain visor keeps water from seeping into the neck opening, as well as keeping your head nice and dry. - Reflective sleeve pull-tabs enable you to dial-in the fit, while also increasing your visibility to others. Adjustable hem with fold-out spray skirt prevents moisture buildup from entering the jacket. - Double-sided SWAT access and vent zipper on the back make accessing jersey or bib pockets a breeze when you have gloves on. - Relaxed Fit is comfortable and loose against the body, allowing for ample layering underneath.
Specialized S-Works Evade GC Skinsuit
$500.00
Poor fitting clothing is one of the largest contributing factors to aerodynamic drag. With this in mind, we decided to take those seconds back, starting with an aggressive fit. But without an anchor point for the jersey, however, material bunches at the shoulders and sleeves. And where there are wrinkles, drag is soon to follow. The solution? The S-Works Evade GC Skinsuit. By creating eight different sizes, we’ve created a level of fit that's akin to a custom skinsuit, which equates to an elimination of bunching and its associated drag. Not stopping there, we also targeted seams at the main source of seam sabotage—the shoulders. And for the first time, we eliminated the shoulder seam altogether. This seamless shoulder construction is patent-pending, and it features a Dimplex aerodynamic fabric composition. The result? This skinsuit is the fastest apparel piece that we’ve ever seen. In fact, compared to our standard SL Pro jersey and bib shorts, it's an astounding 96 seconds faster over 40 kilometers. To meet the needs of modern-day riders and racers, the GC version found here, also includes three integrated pockets on the back, as well as a full-front zipper for added versatility and comfort. - VaporRize moisture transfer knit fabrics are lightweight, breathable, and quick-drying, while a combination of stretch, woven, and aero fabrics ensure that you're putting out your top performance. - Cold Fabric technology reduces surface temperatures on dark colors without sacrificing style. - Three welded, low-profile rear pockets provide ample storage without impeding on airflow over the back. - Patent-pending upper torso/arm construction is seamless for impeccable aerodynamics. - Cuffless welded sleeve opening construction ensures optimal comfort and enhanced aerodynamics. - Pit-stop-enabling design allows for easy nature breaks. - Full-length front zipper allows you to adjust ventilation levels on-the-fly. - Tall sizing offered with additional body length for taller riders.
Specialized S-Works Evade TT Skinsuit
$500.00
When speed is all that matters, we have you covered with our S-Works Evade TT Skinsuit. The S-Works portion of its name should strike a chord, as it represents the fastest, most technologically advanced products that we make. And as the Evade skinsuits are the only clothing pieces to ever be bestowed with this honor, it should give you an idea of their capabilities. There are both TT and everyday options, but this time trial version is intended for short, all-out rides against the clock. By creating eight different sizes, we’ve created a level of fit that's akin to a custom skinsuit, which equates to an elimination of bunching and its associated drag. Not stopping there, we also targeted seams at the main source of seam sabotage—the shoulders. And for the first time, we eliminated the shoulder seam altogether. This seamless shoulder construction is patent-pending, and it features a Dimplex aerodynamic fabric composition. The result? This skinsuit is the fastest apparel piece that we’ve ever seen. In fact, compared to our standard SL Pro jersey and bib shorts, it's an astounding 96 seconds faster over 40 kilometers. To meet the needs of modern day racers, the TT version found here also includes a lower, plunging neckline that rests closer to the collarbone than the GC version, and it's absent of rear storage pockets at the back. Combined, it gives the suit a more traditional feel and a slicker profile while in the TT position. - VaporRize moisture transfer knit fabrics are lightweight, breathable, and quick-drying, while a combination of stretch, woven, and aero fabrics ensure that you're putting out your top performance. - Cold Fabric technology reduces surface temperatures on dark colors without sacrificing style. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Cuffless welded sleeve opening construction ensures optimal comfort and enhanced aerodynamics. - Partial-length front zipper allows just the right amount of on-the-fly ventilation while easing entry and exit of the suit. - Tall sizing offered with additional body length. - S-Works Body Geometry chamois represents a revolutionary design for comfort under the hardest of efforts in the saddle. - Race Fit provides a next-to-skin feel that enhances the aerodynamic purpose of the suit.
Specialized S-Works Women's Evade GC Skinsuit
$500.00
Poor fitting clothing is one of the largest contributing factors to aerodynamic drag. With this in mind, we decided to take those seconds back, starting with an aggressive fit. Without an anchor point for the jersey, however, material bunches at the shoulders and sleeves. And where there are wrinkles, drag is soon to follow. The solution? The Women's S-Works Evade GC Skinsuit. By creating eight different sizes, we’ve created a level of fit that's akin to a custom skinsuit, which equates to an elimination of bunching and its associated drag. Not stopping there, we also targeted seams at the main source of seam sabotage—the shoulders. And for the first time, we eliminated the shoulder seam altogether. This seamless shoulder construction is patent-pending, and it features a Dimplex aerodynamic fabric composition. The result? This skinsuit is the fastest apparel piece that we’ve ever seen. In fact, compared to our standard SL Pro jersey and bib shorts, it's an astounding 96 seconds faster over 40 kilometers. To meet the needs of modern-day riders and racers, the GC version found here also includes three integrated pockets on the back, as well as a full-front zipper for added versatility and comfort. - VaporRize moisture transfer knit fabrics are lightweight, breathable, and quick-drying, while a combination of stretch, woven, and aero fabrics ensure that you're putting out your top performance. - Cold Fabric technology reduces surface temperatures on dark colors without sacrificing style. - Three welded, low-profile rear pockets provide ample storage without impeding on airflow over the back. - Patent-pending upper torso/arm construction is seamless for impeccable aerodynamics. - Cuffless welded sleeve opening construction ensures optimal comfort and enhanced aerodynamics. - Pit-stop-enabling design allows for easy nature breaks. - Full-length front zipper allows you to adjust ventilation levels on-the-fly. - S-Works Body Geometry chamois represents a revolutionary design for comfort under the hardest of efforts in the saddle. - Deflect UV 50+ protects your skin from harmful ultraviolet rays. - Race Fit provides a next-to-skin feel that enhances the aerodynamic purpose of the suit. - Tall sizing offered with additional body length for taller riders.
Specialized Power Cranks - Shimano 105 Upgrade Kit
$425.00
Whether you're looking to take your training to the next level or you simply want a better way to measure energy expenditure, a power meter is your best bet. And the Power Cranks 105 Upgrade Kit are no exception. With our lightweight power sensors on a Shimano 105 crankarm, it's the perfect way to enter the power meter game. The development of Power Cranks began with our Human Performance Team looking at riders in realistic scenarios on the bike. Historically, power meters have been validated by two different methods—one is by measuring the produced torque by applying a static, linear load to a crankarm or chainring, while the second uses a power generating motor to pedal the bike. Well, cycling is neither static nor linear, and humans apply power much differently than a machine. So, we found that neither of these methods answers the 'real-world' accuracy question. To get the best test for accuracy, in all types of riding scenarios, we built our own cycling treadmill, the WinMill, to measure power output to a known truth. This new benchmark lets us evaluate accuracy under all riding conditions—seated versus standing, various power and cadence levels, different weights, and a myriad of gear. This data acquisition process is our gold-standard for testing power meters, and through our testing and external validation from the Locomotion Lab in Boulder, Colorado, Power Cranks have been proven to have the highest accuracy in real-world scenarios (+/- 1.5%). The Power Cranks are also easy to live with, with class-leading temperature compensation firmware and waterproof enclosures. Calibration is only required during seasonal-type fluctuations in temperature, and the included wrench makes battery swaps a breeze. - +/- 1.5% real-world accuracy tested on the WinMill and validated by the Locomotion Lab in Boulder, CO. - Works with ANT+ and Bluetooth devices. - Easy set-up and diagnostics with the Specialized Power app. (iOS and Android versions available). - Shimano 5800 generation 105 left-side power measurement. - Right crankarm and spider NOT included. - Available in 170-175mm crankarm lengths.
Specialized S-Works Recon
$425.00
Finding the perfect high-performance pair of off-road shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon shoes, you get off-road shoes that ready for any kind of adventure, whether it's gravel, cyclocross, or XC racing. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest mixed-terrain FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)
Specialized Deflect Reflect Hybrid Jacket
$400.00
Making a jacket that does one thing well is pretty easy. Making a jacket that does one thing perfectly is pretty hard. And making a jacket does everything exceptionally is next to impossible. Well, you could say that they specialize in the impossible, because the new Deflect Reflect Hybrid Jacket flawlessly performs a bevy of duties, from protection to visibility. Starting with protection, it's made from Specialized's wind- and water-resistant Deflect material. This fabric is extremely lightweight and breathable, so you won't ever experience that rainforest feeling in high humidity conditions. But if things do start to heat up while you're throwing down the watts, they've included two front vents, a large back vent, and laser perforated exhaust points throughout the jacket. To keep water out, the jacket also features adjustable wrist seals, a zipper garage at the collar, a drop tail to deflect road-spray, and an adjustable drawcord hem. Specialized also designed this jacket to be extremely versatile, and to complement this, the sleeves are made to be completely removable. This way, you're able to wear it as a jacket when it's pouring, and then zip off the sleeves and stow them away after you catch a break in the weather. Now, to tackle the "reflect" portion of the title, this jacket features a Schoeller fabric with 3M reflective technology that takes millions of microscopic glass beads and permanently seals them to the fabric structure. As you can imagine, this feature will increase your visibility to others on the road when it encounters light. And better yet, this benefit will not wash out over time.
Specialized S-Works 6 Road Shoe
$400.00
The advantages of the next generation S-Works 6 shoes can be summed up in two simple phrases—explosive speed and superior comfort. The speed comes as a direct result of an incredible fit and better connection, delivering more efficiency and power to the pedals. Meanwhile, the new PadLock heel, combined with some outright revolutionarily strong and lightweight materials in the upper, creates a snug fit that's incredibly secure. The result? You have a shoe that helps transfer more of your energy into the pedals when you crank up the watts. Add to this the legendary performance and adjustability of the dual-Boa® closure system and the S-Works 6 becomes more than just a shoe, it allows you and your bike to work seamlessly together with maximum efficiency. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest FACT Powerline (patent-pending) carbon plate to maximize power transfer: Stiffness Index 13.0. - Dyneema Cubic Tech directional fibers are thermobonded to create no stretch zones for ultimate connection. - Independent Boa S2-Snap dials for on-the-fly micro-adjustment, backed by the Boa® Lifetime Guarantee. - PadLock molded heel and one-piece stroble upper for superior fit. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)
Specialized S-Works 6 Road Shoes
$400.00
The advantages of the next generation S-Works 6 shoes can be summed up in two simple phrases—explosive speed and superior comfort. The speed comes as a direct result of an incredible fit and better connection, delivering more efficiency and power to the pedals. Meanwhile, the new PadLock heel, combined with some outright revolutionarily strong and lightweight materials in the upper, creates a snug fit that's incredibly secure. The result? You have a shoe that helps transfer more of your energy into the pedals when you crank up the watts. Add to this the legendary performance and adjustability of the dual-Boa closure system and the S-Works 6 becomes more than just a shoe, it allows you and your bike to work seamlessly together with maximum efficiency. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest FACT Powerline (patent-pending) carbon plate to maximize power transfer: Stiffness Index 13.0. - Dyneema Cubic Tech directional fibers are thermobonded to create no stretch zones for ultimate connection. - Independent Boa S2-Snap dials for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - PadLock molded heel and one-piece stroble upper for superior fit. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)
Specialized S-Works 6 Road Shoes (Wide)
$400.00
Specialized sums up their S-Works 6 road shoes in two simple phrases: explosive speed and superior comfort. The S-Works 6 is Specialized's stiffest and most efficient shoe ever. Combine that with a Body Geometry sole and footbed that optimizes hip, knee, and foot alignment, the Padlock heel system that locks your feet into the shoes, and independent Boa closures for a custom, on-the-fly fit, and you have one incredibly comfortable, efficient pair of shoes. Asymmetrical titanium cleat bolts rotate to allow for even more flexibility and range for cleat positioning, while replaceable heel treads increase shoe longevity. Plus, strategically placed no-stretch fabric improves your efficiency and connection to the bike.
Specialized S-Works 6 XC Mountain Bike Shoes
$400.00
Specialized spent some time thinking how to describe the S-Works 6 XC mountain bike shoes, and really, their selling point is pretty easy—they're the lightest, most connected XC race shoes in the world. They're not just light, although they are only 270 grams per shoe, but it's more about the blend of low weight and incredible performance. They feature the stiffest and lightest carbon fiber outsole for pedaling efficiency and feedback, while they borrow some unparalleled traits from the road version of the S-Works 6 for explosive speed and superior comfort. The speed comes as a direct result of an incredible fit and better connection, delivering more efficiency and power to the pedal. The PadLock heel, combined with revolutionary strong and lightweight materials in the upper, creates a snug fit that's incredibly secure. The Result? You have a shoe that helps transfer more of your energy into the pedals when you crank up the watts. Add to that the legendary performance and adjustability of the dual-Boa closure system and the S-Works 6 becomes more than just a shoe, it allows you and your bike to work seamlessly together with maximum efficiency. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - The stiffest and lightest FACT plate. Stiffness Index 13.0. - Dyneema Cubic Tech directional fibers are thermo-bonded to create no stretch zones for ultimate connection. - Independent Boa S2-Snap dials for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - PadLock molded heel and one-piece stroble upper for superior fit. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, rubber heel tread. - Form Fit last with roomy toe box for ultimate connectivity and comfort. - Two-bolt cleat pattern fits all major road pedals. - Ceramic printing for lightweight durability - Approximate weight: 270g (1/2 pair, size 42)
Specialized S-Works 6 XC Mountain Bike Shoes
$400.00
Specialized spent some time thinking how to describe the S-Works 6 XC mountain bike shoes, and really, their selling point is pretty easy—they're the lightest, most connected XC race shoes in the world. They're not just light, although they are only 270 grams per shoe, but it's more about the blend of low weight and incredible performance. They feature the stiffest and lightest carbon fiber outsole for pedaling efficiency and feedback, while they borrow some unparalleled traits from the road version of the S-Works 6 for explosive speed and superior comfort. The speed comes as a direct result of an incredible fit and better connection, delivering more efficiency and power to the pedal. The PadLock heel, combined with revolutionary strong and lightweight materials in the upper, creates a snug fit that's incredibly secure. The Result? You have a shoe that helps transfer more of your energy into the pedals when you crank up the watts. Add to that the legendary performance and adjustability of the dual-Boa closure system and the S-Works 6 becomes more than just a shoe, it allows you and your bike to work seamlessly together with maximum efficiency. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - The stiffest and lightest FACT plate. Stiffness Index 13.0. - Dyneema Cubic Tech directional fibers are thermo-bonded to create no stretch zones for ultimate connection. - Independent Boa S2-Snap dials for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - PadLock molded heel and one-piece stroble upper for superior fit. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, rubber heel tread. - Form Fit last with roomy toe box for ultimate connectivity and comfort. - Two-bolt cleat pattern fits all major road pedals. - Ceramic printing for lightweight durability - Approximate weight: 270g (1/2 pair, size 42)
Specialized S-Works 7
$400.00
What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. Specialized took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)
Specialized S-Works 7 Road Shoes
$400.00
What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. Specialized took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)
Specialized S-Works 7 Road Shoes Wide
$400.00
What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. Specialized took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)
Specialized S-Works Trivent
$400.00
When seconds count, you need a shoe that can get you through the transition quickly while offering maximum performance out on the road. Designed for elite-level competition, the S-Works Trivent is the most highly engineered triathlon shoe in the world. It features the revolutionary Tri-Specific Drawbridge closure system, which leaves the heel of the shoe 'popped' open and ready for entry in the transition, while the Launch Clip puts the shoe in the level position for the best flying start possible. Couple this with temperature-regulating construction, a stiff and efficient sole, and Body Geometry ergonomics for great fit and performance, and you're one step closer to your best time ever. - Body Geometry sole construction and footbed: ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Revolutionary Tri Specific Drawbridge closure for the fastest possible time in both transitions (patent pending). - FACT 12.0 carbon sole uses high modulus, unidirectional carbon fiber, and TorsionBox construction to optimize stiffness and weight. - Lightweight Boa L4 closure system backed by the Boa Lifetime Guarantee. - Replaceable high-strength braided steel lace. - Arch-mounted Launch Clip for flying starts (patent pending). - Smooth internal lining for "sockless" riding fit and comfort. - Open tongue design for breathability and drying with toe Velcro closure. - Replaceable heel lugs. - Light, tough, and water-resistant Micromatrix upper for supple comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 280g (1/2 pair, size 42)
Page 1 of 24 Next page