Filter By:

  • Show More Brands
  • Show Fewer Brands

Accessories/Parts

(67 matches)
Chris King R45 Cassette Lockring
$37.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Kinetic Skewer
$12.00
Kurt Kinetic's Skewer is an affordable, steel quick-release that perfectly fits into all Kurt Kinetic trainers. Use it instead of your nice aluminum quick release so it stays in pristine condition. • 130mm width
Continental Easy Tape HP Rim Strip
$10.95
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
SRAM Rise 40 Conversion Cap Tool
$9.00
SRAM's Rise 40 Conversion Cap Tool will allow you to easily change the conversion caps (sold separately) on your Rise 40 wheels.
SRAM Rise MTB Wheel Rim Strip
$7.00
SRAM's Rise MTB Wheel Rim Strip is a great replacement for your Rise 40 or Rise 60 wheels. These lightweight rim strips are 21-mm wide.
Specialized Roval Titanium Quick Releases
$60.00
• Titanium axles with alloy hardware • Steel cam mechanism for longevity, and self-lubricating brass bushings
Delta Knoxnuts Security Skewers
$39.99
If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key. KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer. The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com. Set Includes: - Front blind-head skewer with KnoxNut - Rear blind-head skewer with KnoxNut
SRAM Rise 40 Conversion Caps
$22.00 - $23.00
SRAM's Rise 40 conversion caps are the ticket for converting your Rise 40 wheels to a different axle type. You can easily change axle standards with the SRAM Rise 40 conversion cap tool (sold separately).
SRAM Rise 60 Conversion Caps
$18.00
SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.
SRAM XD Driver Body for Rise 60 Wheel
$67.00
XD is a cassette driver body that allows the use of a 10-tooth small cog and provides an improved interface with the cassette on your SRAM Rise 60 wheels. • Driver body design that lets riders tap the power and range of the SRAM 10-42 11-speed Cassette and a 10-tooth small cog • Provides a stable hub connection
Stan's NoTubes Downhill Rim Strip
$22.50
Stan's Downhill Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
SRAM X0 Hub Conversion Caps
$17.00 - $26.00
SRAM's X0 conversion caps are the ticket for converting your X0 hubs to a different axle type.
Stan's NoTubes Rim Tape
$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
SRAM Conversion Caps for Roam 60/50 and Rail 50 Wheels (Rear)
$46.00 - $48.00
SRAM's Conversion Caps are just what you need to convert your Roam 60, 50, or Rail 50 wheels to fit your bike's rear axle.
SRAM Conversion Cap & 9/10-speed Driver Body for Roam 60/50 and Rail 50 Wheel
$147.00
SRAM's Conversion Cap & 9/10-speed Driver Body is just what you need to convert your XD Driver equipped wheel to a standard cassette.
SRAM Quick Release Pair MTB
$34.00 - $49.00
SRAM's Quick Releases hold your wheel tightly in place, are built for ease of use and made to last, too. You get a front and rear quick release.
Wheelsmith 14 Gauge Aluminum Nipples
$0.60 - $30.00
- Anodized aluminum - 50 nipples per bag - 12mm length
Campagnolo Shamal Ultra Label Kit
$69.90
- Decals for replacement rims
Chris King High Profile Rear Adjustment Clamp
$37.50
Adjustment clamps are used to adjust bearing preload on Chris King hubs. - Includes one High Profile (HP) Adjustment Clamp - Fits all Chris King ISO/Disc Rear Hubs
Chris King 135x10mm Rear ISO Thru Axle
$98.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs) - Allows you to run a 135x10mm Thru Axle on 135mm or 142mm Chris King ISO Hubs - All axles require an adjusting clamp for installation
Chris King 135x12mm Rear ISO Thru Axle
$98.00
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Fits 135mm or 142mm Chris King ISO Rear Hubs (not compatible with 150mm, 157mm or Singlespeed Hubs) - Allows you to run a 135x12mm Thru Axle on 135mm or 142mm Chris King ISO Hubs - All axles require an adjusting clamp for installation
Chris King 15mm Front ISO SD Axle
$73.50
Axle conversion kits are required for converting your current hub to be used on various other axle platforms. - Small Diameter (SD) Axle for 15mm forks - Fits Chris King ISO SD Front Hubs (9mm and 15mm only) - Takes existing 9mm QR Chris King ISO Hubs and allows you to run a 15mm Thru Axle - All axles require an adjusting clamp for installation
Roval Boost Conversion Kit
$55.00
Convert Roval wheels with 142 or 142+ to be used with Boost spacing (110 /148mm) suspension forks and frames. - Kits include front and rear hub end caps, rotor spacers, and kit specific rotor bolts - Compatible with select MY13-16 Roval Wheels. Choose the appropriate SKU for each wheelset - Each conversion kit requires the existing rear wheel to be re-dished to center. Consult an authorized dealer to perform this operation
Wheels Manufacturing Inc. Axle-03
$20.90
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 130mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 141mm - 1 axle per bag
Wheels Manufacturing Inc. Axle-33
$17.20
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many BMX hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 187mm - 1 axle per bag
Crank Brothers XD Driver Body
$99.99
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
Shimano Alfine S700 Small Parts Kit
$12.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Wheels Manufacturing Inc. Axle-13
$13.00
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 174mm - 1 axle per bag
American Classic 17mm Axle Bearing Kit
$32.00
- Bearing Kit for 17mm Axle Hubs - 6803 C3 Stainless Bearings
Wheels Manufacturing Inc. Axle-19
$17.20
Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs - Type: Solid Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 155mm - 1 axle per bag
Page 1 of 3 Next page